loading
reading
writing
saving
searching
NEW DOWNEASTER 11′ DUMP BODY - $10,499
QR Code Link to This Post
LOCATED IN TAX FREE HOOKSETT, NH!
10 gauge construction throughout
Dirt shedding , sloped design at side plate and tailgate top
Double panel side plates equal over 1/4″ thickness.
Full depth 3/16″rear corner pillars incorporate recessed lighting, keyhole banjo eyes and lower tailgate pin receiver.
All lighting is LED rubber mounted and NTEA and Federal compliant.
2 1/2″ shorter deck height (9′ only)
Mounting height of 9.5″ chassis to floor (9′ only)
10″ board extension pockets ease of install & future optional / custom overhang.
Self aligning rear latch release for the top gate pins
Integrated tarp hooks
DuPont™ Imron® Elite black oven cured paint w/ epoxy primer
FLOOR & UNDERSTRUCTURE
4″ x 5.7# Channel long sills and 3″ channel cross members (9′)
6″ x 8.2# Channel long sills (10′, 10.5′ 11′)
3/16″ Stainless formed 7″ long sills (SS body)
3″ stainless tubing, interlaced cross members (SS body)
Two piece 10 gauge floor with 45 degree slopped corners where meets seamless side plate.
Greasable Bronze bearings for underbody release mechanisms
TAILGATE
Formed 10 gauge inner, outer and end panels.
1″ hardened pins, (1″ Stainless) with plasma cut latch receiving lock fingers
Adjustable 1/4″ chain for spreading aggregate material & holding gate in down position
Installation is available!
Not sure which truck bed is right for you? Give us a call at 603.417.2112