Epoch 12v 460Ah V2 Elite Series Lithium Batteries & Victron 3kVA Mult - $4,000 (Salem, NH)

Epoch 12v 460Ah V2 Elite Series Lithium Batteries & Victron 3kVA Mult 1

Epoch 12v 460Ah V2 Elite Series Lithium Batteries & Victron 3kVA Mult 1 thumbnail

condition: excellent

make / manufacturer: Epoch & Victron

model name / number: 460 V2 Elite & Multiplus II 3kVA

QR Code Link to This Post

Here is your chance to upgrade to a premium 12v lithium setup with a Victron Multiplus II 3000 kVA inverter and two 420Ah V2 Elite batteries with Victron communications. There is a total of 920Ah’s of lithium and can run your van or RV Air conditioner, induction cooktop, microwave or hot water heater with no problems on just batteries alone when not tied to shore power. Perfect for a van, RV, shed or small cabin. Both can be tested before you buy. The batteries are marine grade Epochs with built in heaters & fuses, Bluetooth and on/off switches. OTA updates (over the air) for any future firmware updates via bluetooth to always keep the battery BMS up to date. Great setup but we’re upgrading to a 48v system with a second 48v alternator and going to stick with Epoch batteries but with their 48v model. These batteries are in excellent shape and were installed installed in May 2025. The inverter is up to date with the latest firmware and programmed for these batteries. The batteries also have the very latest 2.9 firmware update. The batteries are setup in a parallel master/slave configuration. My husband can install these in your van or RV for an additional fee if you’d like if you’re local in NH/MA area.

Victron inverter and batteries sold as a set for $4000 or can I separate the two batteries for $3600 and the inverter for $700. I have the boxes, documents and cables that came with the batteries. I do not have the box for the inverter though.

Epoch V2 Specs:

* Excellent quality battery for a value price!
* 12-volt, 460 amp hours of storage (LiFePO4).
* Ability to connect the batteries to a Victron GX Device BMS Can port (such as a Cerbo GX) for advanced monitoring and charging using DVCC (cables included). Can also serve as a battery monitor in your Victron system instead of something like a SmartShunt or BMV-712. Note that this capability has been improved with this V2 model.
* IP67 rated for protection against dust and water.
* Integrated heater.
* Integrated T-Class type fuse inside the battery.
* Size: 20.9″ L x 8.7″ W x 12.1″ H
* Charging: 100 amp recommended, 230 maximum.
* Discharging: 100 amps recommended, 300 amps maximum.
* 11-year manufacturer warranty
* Bluetooth capable with iOS and Androidapps.
* Includes:
* Battery with internal BMS
* Remote on/off switch (can be panel mounted, approximately 120″ cable length)
* Battery status monitoring panel (uses integrated shunt inside the battery, approximately 140″ cable length)
* CAN communication cable (for a Victron Cerbo GX)

Victron Multiplus II 3kVA Specs:

* Continuous output: 2.4kW
* Max. surge output: 5.5kW
* AC input range: 90-140V
* DC input range: 9.5-17.0V
* AC output: 120V @ 50Hz/60Hz configurable
* Weight: 42lbs
* Dimensions (H×W×D): 22.76×10.91×5.83in
* One AC input and two AC outputs
* Split phase and three phase capability
* PowerControl and PowerAssist option
* Configurable with remote monitoring from any smart device

post id: 7900569113

posted: 2025-12-06 09:30

♥ best of ^[?]

reading

writing

saving

searching

refresh the page.