craigslist | tools in new hampshire

Craftsman 8in Drill Press Newinbox (Exeter) $80

2009-11-09T18:34:16-05:00

New in box drill press. It is about 4 years old and never been out of the box.
Only opened the box to photo.

curtis vertical air compressor (farmington,nh) $1

2009-11-09T18:11:35-05:00

looking for info on a curtis vertical air compressor,vintage,hooked up and working,believe it to be 80 gal, one tag list curtis mod #4501-613, the other tag says outfit EO454 by curtis. this unit is very old and i am looking to sell it and buy a portable, any info or direction on where to look would be appreciated

Power tools/saws (NASHUA) $30

2009-11-09T17:56:45-05:00

Skill saw and jig saw in excellent condition. Both saws for $30.00.
Nashua/Merrimack line. Great deal!

dewalt 4 piece 18 volt set brand new (hudson nh)

2009-11-09T17:43:50-05:00

dewalt 4 piece 18 volt set brand new still in the box comes with the 4 tools in the pick and 2 batterys and the charger paid $340 for this set selling for $260

Craftsman 10" Table Saw w/Stand & Dust Bag (Boscawen, NH) $150

2009-11-09T17:25:58-05:00

10" Craftsman Table Saw with Stand and Dust Bag. Excellent Condition.

Craftsman 10" Drill Press with Stand (Boscawen, NH) $100

2009-11-09T17:24:25-05:00

10" Craftsman Drill Press with Stand. Used very little.

Craftsman 10" Band Saw w/Stand (Boscawen, NH) $100

2009-11-09T17:23:21-05:00

10" Craftsman Band Saw with Stand. New Blade, saw used very little.

Milwaukee Multi-Bay 12-Volt to 18-Volt Slide Style 3 Bay 45 Minute Bat (S.NH) $70

2009-11-09T17:19:46-05:00

Milwaukee Multi-Bay 12-Volt to 18-Volt Slide Style 3 Bay 45 Minute Battery Charger ~ Model 48-59-0260

Charges up to 3 Milwaukee battery packs in 45 minutes or less. After charging, the battery can remain on the charger in top-off mode to be re-conditioned for longer pack life and increased tool performance.

Steel handle and a blow-molded base for impact protection - even from an eight-foot drop to concrete.

Accepts all Milwaukee slide-on style 12, 14.4, and 18 volt batteries and is generator and inverter ready.

~ Multi-bay charger that charges up to 3 Milwaukee battery packs (12 to 18-volt) simultaneously
~ 45 minute fast charge mode brings batteries up to speed quickly
~ Rugged construction to withstand the job site environment
~ 1 to 4-hour top-off mode reconditions packs after fast charge
~ Weighs 13.2 pounds

Good Used Condition

603 965 0301

Husqvarnas 36" x .165" x 1DP Millenium A1 0.260" Asphalt Diamond Blade (Derry) $1500

2009-11-09T17:14:16-05:00

Husqvarnas 36" x .165" x 1DP Millenium A1 0.260" Asphalt Diamond Blade ~ Model 771414 ~ For Walk-Behind Concrete Saws

High production efficiency
Long life
Low cutting cost per foot

Retails for $2033.00

$1,500.00 or Best Reasonable Offer

Husqvarna Target Construction Products 771414 36" x .165" x 1DP Millenium A1 0.260" Asphalt Diamond Blades are for basalt-like, non-abrasive aggregate or rounded non-abrasive sand. 0.260" series features long life and low cost per foot.

603 965 0302

Snap-on Tool cart (Ossipee NH) $600

2009-11-09T17:07:33-05:00

Red three drawer with an open top for more storage, in very good cond asking $600.00 obo

GREAT !!!Soff-Cut Excel 14 Inch Diamond Blade (Derry) $300

2009-11-09T17:04:00-05:00

NEW Soff-Cut Excel 14 Inch Diamond Blade ~ Model XL14-2000

13.5" x .120

603 965 0302

snap-on muscle mig mm250sl w/acc (kingston, nh) $4000

2009-11-09T16:52:58-05:00

snap-on muscle mig mm250sl. pretty much brand new maybe an hour worth the welding done with it. Have the tig attachment flextig25 and aluminum spool gun mhg5b. I paid $5000 for the package. I also have an auto darking helmet that was $150. looking to get around $4000 or maybe trade for bob-cat or zero turn commercial lawn mower.

Bubble balancer

2009-11-09T16:51:44-05:00

Looking for someone who has a manual for the M-76 Micro Precision bubble balancer that would email me a copy.
Thank you

Reduced - Merry Mac Compact Stump Grinder (Derry) $1600

2009-11-09T16:51:08-05:00

This is a Merry Mac Compact Stump Cutter/Grinder ~~ Model CPSC

Briggs & Stratton Intek 1/C 305 Cast Iron Sleeve 10HP OHV.

Good Used Condition.

603-965-0302

Homelite Gasoline Hedge Trimmer ~ Model UT40502 (Derry) $100

2009-11-09T16:44:40-05:00

Homelite Gasoline Hedge Trimmer ~ Model UT40502

~ Increased Durability and Performance Powerful 26cc engine
~ Quicker, easier starting: Rotochoke Zip Start design for quicker, easier starting
~ Increased Performance: 20 inch single action reciprocating hardened steel blade
~ Increased Performance: 3/8 inch diameter cutting capacity
~ Full loop handle with integrated guard
~ Ease of Use: Anti-vibration system to reduce fatigue

Good Used Condition

603 965 0302

Drill press--floor model--Delta (Nashua NH) $165

2009-11-09T16:42:14-05:00

Delta floor model drill press in excellent condition. Must be picked up in Nashua, NH 603-882-1952

350,000 BTU SPACE HEATER (PLAISTOW NH) $700

2009-11-09T16:11:05-05:00

350,000 BTU MASTER SPACE HEATER. WORKS GREAT. WILL HEAT 2,000 SQ FT TO TEMP IN LESS THAN 5 MIN. THERMOSTAT CONTROLED. IF INTERESTED PLS CALL RICH @ 603 819 1608 THANKS. NO E MAIL PLS.

Poulan "Wild Thing" 18 Inch 40 cc Chainsaw ~~ Model P4018WT (Derry) $120

2009-11-09T16:00:49-05:00

Lightly Used Condition on This Poulan "Wild Thing" 18 Inch 40 cc Chainsaw ~~ Model P4018WT

Plenty of power to cut even the tough stuff

* Creates more power at higher engine speeds

* Promotes consistent lubrication anytime the saw is running

* Designed for comfortable operation and step-through starting

* Longer engine life, reduced fuel consumption & increased power

* Up to 30% Less Pulling Effort

* Inertia Activated Chain Brake stops the rotation of the chain should kickback occur

603 965 1000

Homelite Gasoline Chain Saw ~ 18 Inch 45 cm ~ Two Cycle (Derry) $120

2009-11-09T15:49:12-05:00

Like NEW Condition on This Homelite Gasoline Chain Saw ~ 18 Inch 45 cm ~ Two Cycle

Excellent power-to-weight ratio. With a three-point vibration isolation, this Anti-Vibe advantage helps to reduce operator fatigue.

~ 3-point vibration isolation for improved comfort and reduced fatigue
~ Inertia activated chain brake stops chain automatically
~ Automatic chain oilier

Phone 603 965 0301

Generac Generator MC6500 (Londonderry, NH) $700

2009-11-09T15:38:35-05:00

Generac MC 6500 Extended Life Generator. Only 131 hours of use!! $700

603-321-9624

chain saws (rochester nh) $20

2009-11-09T15:26:13-05:00

I have a green chain saw for $20.00 I have the yellow one for 30.00 and i have a brand new echo 18 inch for 300.00

Homelite 3" diaphragm pump (Kingston) $500

2009-11-09T15:04:45-05:00

Briggs & Stratton, mounted on roll around cart, w/suction hose. Call 603-642-7997

Craftsman 19.2 volt DRILL & Right Angle Drill (Hudson, NH) $75

2009-11-09T15:04:34-05:00

Selling a 19.2 volt cordless drill- driver variable speed and a 19.2 volt right angle drill-driver variable speed both reversible, like new condition used very little also comes with carrying case. $75 or best offer call my cell at 603-809-8468 or reply to craigslist. comes with two batteries and charger.

9 spd floor stand drill press (Pittsfield, NH) $125

2009-11-09T15:01:33-05:00

Enco model 126-2220 drill press, on floor stand with wheels, 1 hp, been in storage so has some surface rust, it's heavy. $150 Pittsfield, NH 603-435-7777 or email.

Plate compactor (Kingston) $495

2009-11-09T15:00:37-05:00

Honda 5 HP. Call 603-642-7997

36' foot Type I Industrial Ext. Ladder (Amherst Nh) $350

2009-11-09T14:58:15-05:00

A brand new Lynn 36' Type I (250 lbs) Industrial Extension ladder for sale. I bought this ladder in September to paint my house and it was cheaper to buy it then rent one. I paid $475 for this and will sell for $350 or best reasonable offer.

Craftsman tow behind spreader (Kingston) $75

2009-11-09T14:57:14-05:00

2.1 cu ft tow behind lawn spreader. Call 603-642-7997

Multiquip 2" centrifugal pump (Kingston) $895

2009-11-09T14:56:27-05:00

Wisconsin Robin engine, very good condition, w/suction hose. Call 603-642-7997

MK 101 tile saw (Kingston) $649

2009-11-09T14:55:27-05:00

with wet kit, excellent condition, like new. Call 603-642-7997

shop vac (Rochester nh) $10

2009-11-09T14:54:25-05:00

stingray shop vac works. asking 10.00

Dynapac LI 90 Plate compactor (Kingston) $1395

2009-11-09T14:52:02-05:00

Honda 5.5HP, plastic water tank w/sprinkler bar, like new. Call 603-642-7997

Encore Air Rake (Kingston) $275

2009-11-09T14:49:46-05:00

Briggs & Stratton 8 HP. Call 603-642-7997

Bomag plate compactor (Kingston) $495

2009-11-09T14:46:32-05:00

Honda 5hp engine. Good condition. Call 603-642-7997

Little Wonder Edger (Kingston) $275

2009-11-09T14:45:46-05:00

Honda 4 HP. Call 603-642-7997

HUNTER C111 ALIGNMENT MACHINE (NOTTINGHAM) $700

2009-11-09T14:37:19-05:00

Hunter c111 alignment machine,bought newer machine I have owned this unit since it was almost new,has manuels printer steering wheel holder brake holder and aluminum wheel adapters. used in low volume shop works excelent has specs. programed in machine or you can program them manualy. I need the space would like to sell as soon as possible 700.00 please call 603-942-5064

milwaulkie 12-18 volt cordless charger (nh ) $15

2009-11-09T14:36:12-05:00

cordless battery charger works on 12-18 volt batteries

( 2 ) RIDGID 18v Lithium - Ion Batteries & Charger NEW (Manchester NH) $145

2009-11-09T14:30:54-05:00

2 ) Brand new never used Ridgid Lithium Ion Batteries Model # R840084 and a Ridgid battery Charger part # R840091 also brand new never used. This also includes the Ridgid Operators Manual. call 603 / 930 / 1517 $145

These Batteries are $90 ea with out the charger

16 inch chain saw 440 Mccullen $75

2009-11-09T14:18:07-05:00

16 " chain saw for sale runs mint ready to go, 848-1205 john. 75.00 cash

Sears Craftsman Radial Arm Saw (Lakes Region, NH) $125

2009-11-09T14:11:24-05:00

Sears Craftsman 10" Radial Arm Saw - used, working condition. Asking $125 or best offer - CASH Only

eagle beaver 20" chain saw $75

2009-11-09T14:11:08-05:00

20" chain saw runs mint ready to go. CASH call John at 848-1205

speedair air compressor (manchester) $350

2009-11-09T12:56:02-05:00

air compressor used maby 6 hours all specs. below price new at store over $800

Type Pressure Switch with Gauge
Pump Type Cast iron
HP 2.0
Max. Pressure (PSI) 135
Free Air CFM @ 90 PSI 5.50
Free Air CFM @ 135 PSI 4.9
Free Air CFM @ Max. Pressure 4.9
Voltage 120/240
Phase 1
Amps AC 15.0/7.5
Tank (Gal.) 30
Tank Type Vertical
(F)NPT Outlet (In.) 1/2
Duty Cycle 80/20
RPM 875
On Pressure Switch Setting 100
Off Pressure Switch Setting 135
Enclosure NEMA 1
Motor Type Open Dripproof Single Phase with Thermal Protection or Three Phase
Length (In.) 26 1/4
Width (In.) 19
Height (In.) 52
Rated Pump Life (Hours) 3600
Tank-Mount and Base-Plate Air Compressors
2-cylinder cast-iron pumps.

6 Wall Brackets (Fremont) $125

2009-11-09T12:53:51-05:00

6 Wall Brackets for exterior siding work.

Call # 603 -642 - 6077 or # 978 - 837 -1983

MAKITA 3" X 18" PREMIUM BELT SANDER, sells new@$120 plus!! (NASHUA ) $29

2009-11-09T12:30:15-05:00

THIS IS A PREMIUM BELT SANDER BY MAKITA!! MODEL IS A 9910 AND THE UNIT WORKS WONDERFUL!! HAS A POWERFUL 5.6 AMP MOTOR FOR ULTIMATE PERFORMANCE, LOW NOISE AND VIBRATION DESIGN, GOOGLE THIS MODEL AND YOU WILL SEE THAT ITS VERY EXPENSIVE TO REPLACE THIS UNIT!! I HAVE NOT SEEN A NEW UNIT FOR UNDER $120.00 PERIOD!! NUMBERS DONT LIE!! PLEASE NO EMAILS OR TEXTS!! NO APPOINTMENTS!! SAME DAY CALL FOR SAME DAY HAUL PERIOD!! WILL DEMO!! 1 617 800 6005 NASHUA NH

Drill Doctor 250 Handyman (Laconia, NH) $30

2009-11-09T12:15:36-05:00

For Sale use Drill Doctor 250 Handyman. Works fine. Good shape. Buyer Pick up. Cash in person only. Any questions email me or give me a call: 603-630-1867.

lowest prices on chainsaws (cranston RI)

2009-11-09T11:39:51-05:00

we have remington electric chainsaws at deep discount prices.
14", 16", and 18"
these were used once they are all almost new
save big money on these demos.
call today - 401- 486 - 1755

BOSCH BRUTE LIKE NEW

2009-11-09T11:16:11-05:00

This drill is a monster with power it comes with a hardcase two batts and quick charger. Its to rugged for what i need. PD 279.00 for it and just built my deck. Please call 603-938-5087 Thanx Dick

Plainer (NH) $250

2009-11-09T11:15:24-05:00

Dewalt plainer new condition. Used very little.
Thanks Scott

BRAND NEW Dewalt 12" Compound Miter Saw (Manchester) $275

2009-11-09T11:05:54-05:00

Brand New in unopened box, Dewalt 12" Single Bevel Compound Miter Saw. Model # DW715.

BRAND NEW, Kobalt Pneumatic Pruning Tool (Manchester) $25

2009-11-09T10:50:42-05:00

Brand new in box, never used. Retails for $90.

Ryobi 18V Lithium Ion Battery Charger (Manchester) $20

2009-11-09T10:49:47-05:00

Brand new, never used. This is a dual chemistry charger. Will charge both NiCad and Lithium Ion 18V One+ batteries. Comes with manual.

Brand New Ryobi 18V Liithium Ion Drill (Manchester) $25

2009-11-09T10:48:46-05:00

BRAND NEW, NEVER USED, Ryobi drill with manual and bit. Accepts both Ryobi 18V One+ batteries (Lithium Ion and NiCad). Price is firm. WHAT YOU SEE IN THE PICTURE IS WHAT YOU GET. BATTERY IS NOT INCLUDED.

Ryobi Lithium Ion Flashlight (Manchester) $10

2009-11-09T10:47:59-05:00

Brand new never used. Works with all Ryobi One+ 18V batteries. Head swivels to 180 degrees. Only flashlight is for sale, charger and batteries are sold separately. Comes with manual .

Hand Truck (Plaistow) $25

2009-11-09T10:44:06-05:00

about 4 feet tall, 1 foot wide blade.

BRAND NEW Craftsman 16-in. Gas Chain Saw (Manchester) $125

2009-11-09T10:43:17-05:00

CHAIN SAW IS BRAND NEW IN UNOPENED BOX. Sells for $170.

Craftsman Model # 7135160

Features:
36cc Engine
Sim-Pul Starting Technology
E-Z Adjust Chain Tensioner
Automatic Oiler

Includes:
-Chain saw
-Case
-3.2 oz. oil to mix with gas
-Manual

DURALINER TRUCK BED LINER (MANCHESTER) $80

2009-11-09T10:42:29-05:00

FULL SIZE BED LINER

Number and Letter Stamps (Plaistow) $100

2009-11-09T10:41:24-05:00

Several sets, many extra.

SENCO STAPEIL GUN (MANCHESTER) $80

2009-11-09T10:37:03-05:00

1/2 STAPEIL

CYCLAMATIC MARK II. PNEUMATIC NAIL GUN. (manchester) $80

2009-11-09T10:31:21-05:00

BOSTITCH T-383 MARK11 T NAILER

big job box (snh) $1

2009-11-09T10:25:58-05:00

i have 4 sale a ridgid job site tool box it is about 5 feet wide 3 feet deep and 3 feet tall the box is made of heavy duty steel box new was $600 but im asking $400 obo. will considder trades what do u have? please call chad 603 913 9373 thanks

Generator - Honeywell HW2000i - new (not used) (Methuen, MA) $390

2009-11-09T10:25:29-05:00

Generator - Honeywell HW2000i - new (not used)
Unwanted gift.
Price $390 Firm (cost $549 plus tax +$34)
Check out Wallmart.com or Home Depot.com for additional info

Generator Information:

Inverter generator that provides clean power to power up even the most sensitive electronic equipment and computers.

When you are ready to go camping, tailgating or just need a portable power supply, the Honeywell HW2000i provides efficient, quiet and clean power for all your recreational needs.

Simplified power control center
Color-coded starting controls and 24-hour starting instructions at 1-888-RECOIL-8
Enclosed design and oversized muffler is engineered for quiet operation
Engine displacement: 125cc
Inverter design provides clean power to power up even the most sensitive electronics
Continous watts: 2000 Max watts: 2100
Amps: 16.7A at 120 Volts
Start - Recoil
Outlets: 120V AC & 12V DC
1.5 gallon fuel tank; uses unleaded fuel
5 hours run time at 50% load
Built-in molded handle
Power indicator light
AC & DC overload protection
50 State Compliant

Model No.: HW2000i
Shipping Weight (in pounds): 62.0
Product in Inches (L x W x H): 29.0 x 29.0 x 27.0

Hitachi MV12V plunge router (Westminster MA) $275

2009-11-09T09:54:50-05:00

Hitachi MV12V 3.25hp plunge router, 1/2 inch and 1/4 inch collet and table plate included, no emails please call jake 207-604-6501, can deliver or meet up, other tools available, hitachi drivers, grizzly G1022 10" table saw, heavy duty bench drill press

miller millermatic 210 (haverhill, ma) $900

2009-11-09T09:51:04-05:00

millermatic 210 in near perfect condition, works perfect, lows hours, with wheel kit, regulator and hose. 240volt 210 amp mig welder with high duty cycle for welding for extended periods of time. $900 picture is not my machine just a picture of a millernatic 210

Tool Sale - Open House (Milford, NH)

2009-11-09T09:29:36-05:00

Retiring Contractor/Carpenter Tool Sale. We are hosting an �open workshop sale event�.

Date: 11/15
Time: 10:00 am � 4:00 pm
Location: 260 Elm Street, Unit #10, Milford NH 03055
Info: Call Dave @ 603.401.4245

Many quality commercial grade tools for sale ranging from table saws, nail guns, hand saws, sanders, ladder jacks, drill press, hand tools, and much more. Must sell all items. Great deals to be had. Priced as best offer. Please see inventory list below of feature items. Click link to view item pictures. Many more carpenter and handyman supplies for sale, but not listed.

For pictures of the items, click here: http://www.flickr.com/photos/42607544@N04/sets/72157622390700164/

Rockwell Model 10� Table Saw
Delta Drill Press
Delta Radial Arm Saw
10� Portable Table Saw
Reddy Portable Gas Heater 25,000 BTU
Echo Chain Saw
Craftsmen 10� Table Saw
Craftsmen Bench Grinder
Craftsmen Power Planner
Craftsmen Jig Saw
Craftsmen (small) Tool Box w/misc hand tools
Dewalt Ban Saw
Dewalt 18V 3 piece cordless set
Bostitch Nail Guns (4 to choose from)
Hitachi Strip Nailer
Makita Power Planner
Makita Miter Saw 10�
Makita Jig Saw
Makita Palm Sander
Makita Belt Sander
Milwaukee Skill Saw
Ladder Jacks/Pump Jacks/Roof Brackets
Comforter Cast Iron Wood Stove

$500.00 REWARD FOR OUR SIDING BREAK (LONDONDERRY, N.H.) $500

2009-11-09T09:05:47-05:00

Over this past weekend, our Tapco. 10 Foot 6 Inch Siding Break was stolen from one of our company vehicles at our showroom in Londonderry, N.H.

At a time of the year when most companies struggle to stay busy, we depended on this break for use on a daily basis.

We are offering a $500.00 reward for the return of our break or information leading to the return of our break.

Heck, we'll even throw in another $100.00 if you bring in the scumbag(s) responsible for the theft.

Please call us at 603-895-2092.

P & H Zip-Lift 1/2 ton cable hoist (Hartland, VT) $200

2009-11-09T09:05:17-05:00

P & H Zip-Lift 1/2 ton capacity, electric ( 110 volts ) cable hoist with trolley, 15 feet per minute. NEEDS new cable, 3/16 diameter

Toys (Troy NH)

2009-11-09T08:56:27-05:00

Our boys have out grown the riding toys and we just dont have room anymore for the others:

Tonka and Fisher price school bus riding toys $5.00 each music and noises still work
Radio Flyer Big Wheel barley used went right to a big bike $40.00
Radio Flyer Horse barley used didnt have the space $100

All pickup only please email for pics if interested.

10" bench top table saw (Hampstead, NH) $25

2009-11-09T07:59:40-05:00

this is a good saw
nothing fancy but it works well

Manual Tile Cutter (Rochester, NH) $30

2009-11-09T07:57:49-05:00

***A Good Deal***
Like new. Also, has a separate tool for making circular cuts.
Manual tile cutter. ****** $30 ******335-6924

110V arc welder great little tool (hampstead, NH) $80

2009-11-09T07:57:20-05:00

this is a great little welder
works awsome
will weld up to 1/4" thick
fully adjustable to what you want to weld
comes with some rods

Aluminum Extension Ladder (Rochester, NH) $60

2009-11-09T07:44:50-05:00

Aluminum Extension Ladder (Extends from 10 ft.to about 18 ft.) $60- 335-6924

WALL JACKS (SW/NH) $500

2009-11-09T07:13:43-05:00

1 pair Proctor wall jacks. Will lift 10 high by 50' framed walls.
Like new used once.
reply to the ad with your phone # and I will get back to you
Price is firm @ half of the original cost.

Pump Staging (S. NH) $1500

2009-11-09T07:11:13-05:00

Aluma Pole. complete setup, 2- 24' towers, 2 - 24' walk planks, work bench attachments
perfect working condition, price is firm @ 1/2 original cost. No tire kickers please.

Wrenches and Screwdriver (Manchester, NH) $5

2009-11-09T00:21:26-05:00

Speed wrench automatically adjusts to fit nuts and bolts of many different sizes. It tightens and loosens quickly with ratcheting action.

Bicycle wrench contains 8 different size wrenches in 1. Solid construction.

Phillips screwdriver is 6 1/2� long with rubber handle for firm grip.

All in good condition. $5 for everything.

Sewer Auger (Newington, NH) $175

2009-11-08T23:52:49-05:00

Ridgid Kollmann - 380 sewer auger, unused. $350 at Home Depot.
Reason for sale, downsizing
Pho. 603 498-4348

skyjack 4626 scissor lift 243 hours! (barre vt) $3500

2009-11-08T23:43:20-05:00

Skyjack scissor lift for sale. 46" wide, platform height of 26ft, working height around 32ft, a super low 243 hours, believe it to be a 2002 model year but not 100% sure. Has extendable platform, non-marking tires, and the manual is included. $3500 E-mail or call me at 802-793-7023

10 inch Craftsman Radial Arm saw with stand and extra blade (atkinson,nh) $100

2009-11-08T21:27:25-05:00

10 inch Craftsman Radial Arm saw with stand and extra blade $100

Assorted Tools (Rochester NH) $100

2009-11-08T21:17:24-05:00

Here a few of the items too many to list

Dewalt Sheetrock Drill
Stanley Screwdrivers, Tape Measures, Chisel
Craftsman Screwdrivers, Alan Wrenches,
Black & Decker Battery opeated Tape Measure
Gerber Knive
Staple Gun
Utility Knives
BernzOmatic Torch Head
3 new packages of Screening Spline
Needlenose pliers Pump Pliers

Must sell all together

Air Compressor (Freeport, Maine) $325

2009-11-08T21:04:32-05:00

6 hp 60 gallon tank upright, two cylinder oiless. 11.5 scfm at 90 psi. Max 125 psi. 240 volt. I plugged it into a dryer outlet in the garage, or it can be wired direct easily.This is a large craftsman model that is in very good condition. It can sit in the corner of your garage. Powered everything for air tools and body tools in my home car hobby shop. I have painted five cars with it. Used on weekends at my home. Come see it in use and try it out. I have been given a commercial compressor from a friends shop and no longer need this one. call 207-272-7218

PTO GENERATOR 25KV (Haverhill, Ma) $1100

2009-11-08T20:54:56-05:00

I have a Dayton 25KV PTO Generator for sale. This is a great unit to bring power out into the fields or standy generator for your home or business. The unit works perfectly. The unit is priced at $1100 or best offer. Thanks for looking. The unit is stored in Haverhill, Massachusetts 603-365-7242

Makita LS1013 Dual Slide Compound 10-inch Miter Saw Kit (Windham) $250

2009-11-08T20:49:30-05:00

Makita LS1013 Dual Slide Compound 10-inch Miter Saw Kit

Paid over 500 hundresd a few years ago, great tool will settle for 250.

diamond plate tool box (claremont,nh) $90

2009-11-08T20:28:01-05:00

fits full size truck. single access from either side. no keys. will get pix if you need. 603-667-3842

Porter Cable Compressor - 6 Gal Tank (Hudson, NH) $90

2009-11-08T20:03:48-05:00

Porter Cable compressor. Like new condition, used only a few times. Great for use with nail guns and when you don't feel like dragging around a big heavy compressor. This is a nice portable unit, guessing maybe 25lbs. 6 gal tank, includes an air hose and manual. $100.

large grease gun (rochester) $15

2009-11-08T19:54:53-05:00

large black grease gun works like new, also has half a canister of chasis grease

it is 11 inches long with a 7 inch nozzle

15 obo open to trades

email @lamerchant@ymail.com

240 Volt Craftsman Compressor (Londonderry, NH) $200

2009-11-08T19:52:58-05:00

6 hp, 33 gallon compressor - hardly used - runs great

Alpha Pro Eco Cutter Dry Cut Tile Saw (Lakes Region) $450

2009-11-08T19:29:18-05:00

Like brand new used one time.....look at the pictures....this is an Alpha Professional Dry Cutting tile, slate, porcelin, marble, and granite saw. Virtually dust free....comes with all accessories and stand, dust collection bag and a carrying case.

Possible trade for snowmobile.....

Key words: wet saw, tile cutter, tile saw, table saw, cheap, deal, must sell

Craftsman Tool Chest (Concord) $150

2009-11-08T19:28:33-05:00

Chest on chest: Top chest 12' x 18' x 26', 12 drawers (9 over 3). Bottom chest 18" x 26" x 34" with 5 drawers, tray and bottom storage. Excellent condition, no dents or rust, red.

Steel Slings (danville) $40

2009-11-08T19:23:17-05:00

I have 4@ 72 inch long 1/2 inch steel cable rigging slings and one 4 way with broken hooks 40.00 or best offer

7" table top wetsaw (Lakes Region) $40

2009-11-08T19:13:24-05:00

7" table top wetsaw.....cheap money....first come first serve....$40.00 come and get it firm, firm, firm....

comes with blade, and all original accessories.... only used a few times

key word tool, wet saw, table, cheap, deal, tile, cutter,

Delta table saw 10in (Rochester) $35

2009-11-08T19:11:58-05:00

model 36-540 type 2
clean runs great
included 10 in blade-rip fence-miter gage

ODJOB mixer by Scepter (Manchester) $20

2009-11-08T19:07:08-05:00

7 Gallon Mixing System, Mixes Concrete, Mortor, Grout, Soil, Seed, Fertilizer, Compost Or Paint, Mixes 60 LB Of Concrete In 30 Seconds.

Husky Compressor (bedford, nh) $200

2009-11-08T19:03:11-05:00

Husky large capacity compressor. Very little use. 5.5 hp, 26 gallon tank, 1.7 hp peak and 150psi max. Can be used either in a horizontal or vertical position. (Very helpful when storing it in your garage) Brand new 25-foot red hose. Excellent Condition. Model is a Verti-Zontal... 120V / 15amp / single phase Price is firm. Email me if you are interested. Thanks

Milwaukee Screw Shooter (Hudson) $75

2009-11-08T18:59:50-05:00

Powerful 5.0 amp Milwaukee Motor Variable trigger speed control 0-2500 RPM Length 11-3/4" Wght. 3-5/8 Lbs. 1/4" Hex bit shank size Kit includes steel carrying case with removable top tray and belt clip.

The unit is in new condition.

25 gal horiz compressor (So. ME/NH border) $100

2009-11-08T18:59:15-05:00

25 gal horz compressor on wheels. Works excellent. $100... Call Brad @ 207-459-9412

Lincoln welder, varaible AC welder (So. ME/NH) $200

2009-11-08T18:55:31-05:00

Lincoln variable (40-225) volt arc welder. Model # AC-225-S. Good shape and works well. $200 OBRO. Assessories include, face sheild, assorted size welding sticks, extra welding clamp, welding plates.
call Brad @ 207-459-9412

Compressor 25 hp (Epping) $800

2009-11-08T17:44:50-05:00

Ingersol Rand 25 hp compressor, 3 phase. $800 or B.O. I can load it on your trailer. Call Randy for more info. 679-8076

Huskey diamond plate tool box (Exeter NH ) $60

2009-11-08T17:23:58-05:00

Diamond plate tool box for full size pick up. Base measures 5 foot 7/8 inches.

Antique Surface Planer (Manchester,N.H.) $100

2009-11-08T17:20:19-05:00

Antique Surface Planer, Asking 100.00, If your intrested, Call Scott (603)233-2255

Craftsman Toolbox (Tilton, NH) $20

2009-11-08T17:15:21-05:00

Four drawer plus top compartment. The box measures a little more than 14:" high, 20.5 inches long and 8.5+ inches deep.

Radial Arm Saw (Claremont) $125

2009-11-08T17:10:09-05:00

Craftsman Radial Arm Saw

First 125.00 takes it located in Claremont NH.
Call Art 603-630-0204

28' Foot Aluminum Ladder (Lincoln, NH) $75

2009-11-08T17:10:03-05:00

16' Foot Aluminum Ladder 75.00 - SOLD
28' Foot Aluminum Ladder 150.00
40' Foot Aluminum Ladder 200.00 - SOLD

EXCELLENT CONDITION!!!

Contact: Ryan
Phone: 603.236.6305
E-Mail: N152N@hotmail.com